# text: "Log Watcher is shareware.\nSupporting shareware you will allow production of low cost software.\nIf you use Log Watcher please register sending $ 18.00 to the author.\nCD-Rom & Disk distribution is allowed."
# item 8: TEXT (0x88) disabled
# bounds: x1=48 y1=51 x2=150 y2=79
# text: "Log Watcher 1.1.4\nfor Macintosh Server"
# item 9: PICTURE (0x40) enabled
# bounds: x1=3 y1=48 x2=43 y2=83
# PICT resource ID: 129
# item 10: PICTURE (0x40) enabled
# bounds: x1=-27 y1=3 x2=411 y2=46
# PICT resource ID: 128
DITL_129_Register Lite.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=230 x2=269 y2=250
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=127 y1=230 x2=185 y2=250
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=70 y1=100 x2=315 y2=116
# text: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=70 y1=130 x2=315 y2=146
# text: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=160 y1=350 x2=225 y2=371
# data: ""
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=318 y2=27
# text: "Insert Your Name and Password to Register"
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=30 x2=318 y2=92
# text: "To obtain your password please register to the author.\nSupporting shareware you will allow development of other software.\nInsert your Name as it was written for registration and the password as obtained exactly without any additional space."
# item 7: TEXT (0x88) disabled
# bounds: x1=10 y1=160 x2=319 y2=213
# text: "WARNING:\nKeep the registration paper you obtained in a safe place!\nIf you move the software on another Macintosh or use another startup HD you will be asked to introduce your data again."
# item 8: TEXT (0x88) disabled
# bounds: x1=30 y1=100 x2=65 y2=114
# text: "Name:"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=130 x2=63 y2=145
# text: "Password:"
DITL_130_Register Full.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=208 x2=318 y2=228
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=188 y1=208 x2=246 y2=228
# text: "Cancel"
# item 2: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=40 x2=333 y2=58
# text: ""
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=68 x2=333 y2=85
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=76 y1=96 x2=329 y2=113
# text: ""
# item 5: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=116 x2=332 y2=136
# text: ""
# item 6: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=148 x2=332 y2=166
# text: ""
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=176 x2=332 y2=193
# text: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=10 y1=450 x2=42 y2=482
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=8 y1=148 x2=61 y2=164
# text: "Name:"
# item 10: TEXT (0x88) disabled
# bounds: x1=4 y1=176 x2=61 y2=192
# text: "Company:"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=57 y2=56
# text: "Licence:"
# item 12: TEXT (0x88) disabled
# bounds: x1=8 y1=68 x2=62 y2=84
# text: "PW Lic:"
# item 13: TEXT (0x88) disabled
# bounds: x1=4 y1=96 x2=70 y2=112
# text: "Access Key:"
# item 14: TEXT (0x88) disabled
# bounds: x1=8 y1=124 x2=69 y2=140
# text: "Access PW:"
# item 15: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=332 y2=33
# text: "Plese, personalize the program with your data."
DITL_131.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=200 x2=328 y2=220
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=180 y1=200 x2=238 y2=220
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=40 x2=335 y2=58
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=80 y1=64 x2=333 y2=81
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=80 y1=88 x2=333 y2=105
# text: ""
# item 5: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=112 x2=332 y2=130
# text: ""
# item 6: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=140 x2=333 y2=158
# text: ""
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=168 x2=332 y2=185
# text: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=10 y1=450 x2=42 y2=482
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=140 x2=63 y2=156
# text: "Name:"
# item 10: TEXT (0x88) disabled
# bounds: x1=10 y1=168 x2=67 y2=184
# text: "Company:"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=57 y2=57
# text: "Licence:"
# item 12: TEXT (0x88) disabled
# bounds: x1=10 y1=64 x2=64 y2=80
# text: "PW Lic:"
# item 13: TEXT (0x88) disabled
# bounds: x1=10 y1=88 x2=76 y2=104
# text: "Access Key:"
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=112 x2=74 y2=128
# text: "Access PW:"
# item 15: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=303 y2=34
# text: "Plese, personalize the program with your data."
DITL_132_Please Register.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=177 y1=198 x2=244 y2=219
# text: "Register"
# item 1: BUTTON (0x04) enabled
# bounds: x1=90 y1=198 x2=157 y2=219
# text: "Later"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=12 y1=384 x2=44 y2=416
# data: ""
DITL_133_wrong PW.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=121 x2=322 y2=141
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=18 x2=363 y2=106
# text: "Wrong Password !\nPlease read correctly the password you received and type it EXACTLY!\nDigit also your name as you requested in your registration EXACTLY! "
DITL_134.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=125 x2=314 y2=145
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=61 y1=12 x2=339 y2=112
# text: "Not enough memory to complete this task!\nTry to alleviate the problem by closing some document or increasing the partition size of the application, than try again!"
DITL_135_wrap.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=178 y1=82 x2=236 y2=102
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=100 y1=82 x2=158 y2=102
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=17 y1=52 x2=76 y2=68
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=13 y1=25 x2=251 y2=46
# text: "New Text Length (in character):"
# item 4: TEXT (0x88) disabled
# bounds: x1=88 y1=53 x2=224 y2=70
# text: "(min 30 - max 300)"
# item 5: TEXT (0x88) disabled
# bounds: x1=13 y1=8 x2=249 y2=23
# text: "____________________________"
# item 6: TEXT (0x88) disabled
# bounds: x1=15 y1=4 x2=90 y2=19
# text: "Wrap"
DITL_136.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=208 y1=102 x2=266 y2=122
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=66 y1=12 x2=288 y2=92
# text: "^0"
DITL_137_Enabled only for reg user.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=251 y1=94 x2=309 y2=114
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=65 y1=10 x2=336 y2=73
# text: "Command available only for registered users.\nRegistering this software, this function will be automatically enabled."
DITL_138.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=265 y1=165 x2=323 y2=185
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=75 y1=10 x2=344 y2=145
# text: "Not enough memory to complete this task.\nLog Watcher allocate memory to open files outside the application partition.\nCheck if the total available memory is enough.\nQuit some other application to increase total free memory."
DITL_139_Auto startup file not available.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=124 x2=310 y2=144
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=68 y1=8 x2=358 y2=117
# text: "Sorry, the file \'^0 \' selected in the preference to open at startup is not available.\nPlease go to the preference dialog and select another file or another option."
DITL_140.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=213 y1=58 x2=271 y2=78
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=75 y1=9 x2=290 y2=44
# text: "Help is provided under the help menu"
DITL_201.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=71 x2=348 y2=91
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=215 y1=71 x2=275 y2=91
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=75 y1=71 x2=159 y2=91
# text: "Don’t Save"
# item 3: TEXT (0x88) disabled
# bounds: x1=75 y1=10 x2=348 y2=58
# text: "Save changes to the ^0 document “^1” before closing?"
DITL_202.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=71 x2=348 y2=91
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=215 y1=71 x2=275 y2=91
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=75 y1=71 x2=159 y2=91
# text: "Don’t Save"
# item 3: TEXT (0x88) disabled
# bounds: x1=75 y1=10 x2=348 y2=58
# text: "Save changes to the ^0 document “^1” before quitting?"
DITL_203.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=55 x2=290 y2=75
# text: "Revert"
# item 1: BUTTON (0x04) enabled
# bounds: x1=157 y1=55 x2=217 y2=75
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=75 y1=10 x2=290 y2=42
# text: "Revert to the last saved version of “^0”?"
DITL_204.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=281 y1=86 x2=341 y2=106
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=75 y1=10 x2=348 y2=79
# text: "Memory is getting full. Please try to alleviate the problem by closing some documents or increasing the partition size of the application. "